Aeron Chair by Herman Miller Size C – Graphite. This is an open-boxed item. There are two places on the seat where the threads in the mesh have been pulled apart but are not torn all the way through. There are no holes in the seat as a result of these pulled threads and the seat still has the same level of support. The damage is cosmetic only. An Official Herman Miller Retailer. We’re an authorized Herman Miller retailer. This means we’re official. A-Small Chair Size Recommended if you are: Height: 4’10” – 5’9″ tall Weight: 90 – 150 lb. B-Medium Chair Size Recommended if you are: Height: 5’2″ – 6’6″ tall Weight: 130 – 325 lb. C-Large Chair Size Recommended if you are: Height: 5’3″ – 6’6″ tall Weight: 180 – 350 lb. To meet the needs of the broadest possible set of body types, the original Herman Miller Aeron was designed in three proportional sizes. This approach to inclusiveness became an integral element of Aeron’s DNA. That’s why the new Aeron Chair is available in the same, body-fitting A-B-C sizing. Use the chart below to help you decide which size of Aeron is right for your body. Height and weight are used here as key indicators of suitable chair-size choice. The most common size is B. How to use the sizing chart. Find the point of intersection for your height and weight. Note the size that is applicable. One Size Does Not Fit All. With chairs, one size does not fit all people. Based on an end-to-the-middle design approach, Aeron comes in three sizes (A, B, and C) to provide an inclusive fit that delivers the same level of comfort to the largest range of body types of any office chair. 41″ x 28″ x 27. Seat back needs to be attached to base. Pellicle, the innovative, elastomeric suspension of the original Aeron, eliminated circulation-restricting pressure points and stretched the boundaries of material design. New 8Z PellicleT pushes the material to a whole new zone-eight of them. By doing away with foam and fabric, Aeron solved one of biggest prolonged sitting predicaments: the buildup of heat and humidity close to the body. Pellicle allows air, body heat, and water vapor to pass through the seat and backrest to help maintain even and comfortable skin temperatures. If an active body is at its strongest when standing, chest open and pelvis tilted slightly forward, it makes sense that you would be better off sitting like that too. And that’s exactly where PostureFit SLT comes in. Adjustable, individual pads stabilize the sacrum and support the lumbar region of the spine to mimic that healthful standing position. Staying in one position reduces the natural pumping action of the muscles that delivers nutrients to the intervertebral disks. The Aeron chair’s tilt allows it to move with the body in such a natural way that people can shift from forward to reclining postures without even thinking about it. Today’s slimmer, updated tilt mechanism delivers a more seamless experience of movement (and stasis) to the sitter through a smoother trajectory and optimal balance point. Aeron lets you shift from forward to reclining postures without a thought. A slimmer, updated tilt mechanism delivers a seamless experience of movement and balance. Through a smoother trajectory and optimal balance point, it keeps people in contact with the seat back and in control of their movement throughout the entire range of recline. Customized Fit with Less Dial Turns. The original design made it possible to adjust the amount of recline and resistance to the sitter’s liking. Depending on the sitter’s scale, this involved up to 50 turns of the tilt mechanism. Advancements in materials and engineering allowed Herman Miller to scale back the amount of turning, twisting, and time spent customizing a personal fit. Now the sitter can reach a custom recline in 13 turns or less. Indoor Advantage Gold certification is SCS Global Services’ highest level of indoor air quality performance for furniture. The certification ensures that furniture products support a healthy indoor environment by meeting strict chemical emission limits for volatile organic compounds (VOCs). Tilt Limiter with Seat Angle Adjustment. Tilt Limiter lets you limit the recline range between fully upright and fully reclined. The tension control lets you adjust the amount of effort needed to recline comfortably while feeling balanced and supported. Recline range can be limited at one of three postures: upright, mid-recline, or full-recline. Additional back support on the Aeron Chair is optional, although, highly-recommended for those who sit for long periods of time or suffer from lower back pain. PostureFit SL is an optional lower lumbar back support device available on the Aeron chair. It offers the best lower back support for anyone suffering from lower back pain or discomfort. Unlike its predecessor, PostureFit SL is adjustable. The original PostureFit was developed to provide back support that comfortably sustains the pelvis in its natural forward tilt-the position the body holds while standing powerfully upright. It did so by adjusting to fill the void between the contours of the sacral-pelvic area and the backrest. Subsequently, PostureFit has become a critical part of every Herman Miller performance chair. Today, by incorporating adjustable sacral and lumbar support, PostureFit SL brings the technology to a whole new level. It supports the sacral region to nurture the natural S-shape of the spine, rotate the pelvis forward, and activate healthful posture-all while sitting upright. A secondary pad provides comfort and support to the lumbar region of the spine. Together, they help strengthen the spine to produce what Herman Miller calls power posture. PostureFit SL puts the sitter in complete control of his or her posture with the new Aeron Chair’s premier spinal support system. This item is in the category “Business & Industrial\Office\Office Furniture\Chairs & Stools”. The seller is “officeoutletfinds” and is located in this country: US. This item can be shipped to United States.

• Brand: Herman Miller
• Model: Aeron
• Style: Office/Desk Chair